Audi RS7 C7.0 (2013-2014) – BK-Motorsport Europe https://bk-motorsport.eu A Premier Tuning Company Tue, 06 Aug 2024 20:40:26 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 BKM Wide Body Fender, fits Audi A7/S7 C7.0 https://bk-motorsport.eu/tuning/audi/audi-a7/audi-a7-c7/bkm-wide-body-fender-fits-audi-a7-s7-c7-0/ Tue, 06 Aug 2024 20:39:49 +0000 https://bk-motorsport.eu/?post_type=product&p=52680 Wider front fenders 3 cm wider per side then the stock fenders, this set allows for much wider lower profile to the car.
Comes as a set of 2 fenders, passenger and drivers side.
Premium Quality Made in Germany / surface gelcoat gray Material appraisals included.

This is an aftermarket modified (not OEM) product.

This product is delivered unpainted.

The product is not primed.

Parts are delivered unfinished and will need to be sanded and prepped before any paint work is done.

They require a body shop to handle the installation because they will require fitment and trimming of accessories for installation on some products.

It is important to check the fit of the part on the vehicle before painting!

Important note!

This product does not contain front grille, Audi (four-rings), quattro and RS logos. The logos and the grille shown on the pictures are for illustration purpose only. These items can be purchased separately in any official Audi dealership.

BK-Motorsport is an aftermarket supplier not affiliated with Audi AG or any of its affiliates. BKM aftermarket parts are not manufactured by the OEM nor with its authorization nor under its supervision. The grille, the Four-Rings logo, the quattro and the RS logos are registered marks of the OEM and these items are solely available through them.

]]> BKM Replacement Parts for BKM front bumper, fits Audi A6/A7/S7/RS7 C7.0 https://bk-motorsport.eu/tuning/audi/audi-a7/audi-a7-c7/bkm-replacement-parts-for-bkm-front-bumper-fits-audi-a6-a7-c7-0/ Wed, 08 Sep 2021 20:51:03 +0000 https://bk-motorsport.eu/?post_type=product&p=48636 BKM Replacement Parts for BKM front bumper, fits Audi A6/A7/S7/RS7 C7.0

  1. Bumper cover (part #: BKM_13_A6_A7_BUMPER_COVER_REP)
  2. Glossy black left side mesh grille (part #: BKM_A6_A7_LEFTSIDEMESHGRILLE_REP)
  3. Glossy black right side mesh grille (part #: BKM_A6_A7_RIGHTSIDEMESHGRILLE_REP)
  4. Silver side left air duct (part #: BKM_A6_A7_LEFT_SILVER)
  5. Silver side right air duct (part #: BKM_A6_A7_RIGHT_SILVER)
  6. Side air duct backplate set (part #: BKM_A6_A7_SET_DUCT_PLATE)
  7. Fake ACC sensor set with front covers (part #: BKM_A6_A7_ACC_FAKE)
  8. Bumper under cover (part #: BKM_A6_A7_UNDER_COVER)
  9. Silver middle spoiler (PART #: BKM_A6_A7_SILVER_SPOILER_REP)

IMPORTANT! NO REPLACEMENT PRODUCTS WILL BE ACCEPTED BACK FOR RETURN OR REFUND. NO RETURN WARRANTY OR POLICY APPLY TO REPLACEMENT PARTS. ONCE YOU CHECK OUT REPLACMENT PRODUCT YOU ACCEPT THIS TERMS AND CONDITIONS AND IT IS YOUR PRODUCT!

This is an aftermarket modified (not OEM) product.

This product is delivered unpainted. The price does not include painting and installation costs.

The product is primed. However, we don’t know what primer the manufacturer used (it might change by time to time) so it is the body shop solo responsibility to check it if it works with their products and make the necessary preparation. Parts are delivered unfinished and will need to be sanded and prepped before any paint work is done. They require a body shop to handle the installation because they will require fitment and trimming of accessories for installation on some products.

It is important to check the fit of the part on the vehicle before painting!

Important note!

This product does not contain front grille, Audi (four-rings), quattro and RS logos. The logos and the grille shown on the pictures are for illustration purpose only. These items can be purchased separately in any official Audi dealership.

BK-Motorsport is an aftermarket supplier not affiliated with Audi AG or any of its affiliates. BKM aftermarket parts are not manufactured by the OEM nor with its authorization nor under its supervision. The grille, the Four-Rings logo, the quattro and the RS logos are registered marks of the OEM and these items are solely available through them.

]]> BKM Front Lip for BKM Bumper, Glossy Black, fits Audi A7/S7/RS7 C7.0/C7.5 https://bk-motorsport.eu/tuning/audi/audi-a7/audi-a7-c7/bkm-front-lip-for-bkm-bumper-glossy-black-fits-audi-a7-s7-c7-0-c7-5/ Wed, 04 Nov 2020 19:08:05 +0000 https://bk-motorsport.eu/?post_type=product&p=47713 BKM glossy black front bumper lip. Fits Audi A7/S7/RS7C7.0/C7.5.
This item compatible with the BKM bumper only, doesn’t fit the stock Audi bumper.

Please note if you do wish to purchase the lip you will lose the bottom middle piece from the BKM front bumper, because this lip middle piece will replace that and that is the only way that this will fit inside of it. If you do not wish to lose the middle piece from Original BKM bumper please note this will not fit then.

This is an aftermarket modified (not OEM) product.

Important note!

This product does not contain front grille, Audi (four-rings), quattro and RS logos. The logos and the grille shown on the pictures are for illustration purpose only. These items can be purchased separately in any official Audi dealership.

BK-Motorsport is an aftermarket supplier not affiliated with Audi AG or any of its affiliates. BKM aftermarket parts are not manufactured by the OEM nor with its authorization nor under its supervision. The grille, the Four-Rings logo, the quattro and the RS logos are registered marks of the OEM and these items are solely available through them.

]]> BKM Front Bumper Kit (RS-Style), fits Audi A7/S7/RS7 C7.0 https://bk-motorsport.eu/tuning/audi/audi-a7/audi-a7-c7/bkm-front-bumper-kit-fits-audi-a7-s7-c7-0/ Fri, 22 Sep 2017 22:38:36 +0000 https://www.bk-motorsport.eu/?post_type=product&p=34369 BKM front bumper kit. Fits Audi A7/S7/RS7 C7.0.

The bumper has two mounting holes for the PDC sensors. If your car is not equipped with PDC, the PDC Blind Plug Set additional option must be selected!

The bumper contains two ACC blind plugs. If your car is equipped with adaptive cruise control, replace these blind plugs with the car’s original ACC sensors! In some cases it may be necessary to recalibrate the ACC sensors if their position changes during installation.

Your car’s original front grille must be installed in the bumper. If your car is equipped with front view and night vision cameras, these are located in the car’s original front grille.

Bumper parts description:

This is an aftermarket modified (not OEM) product.

This product is delivered unpainted. The price does not include painting and installation costs.

The product is primed. However, we don’t know what primer the manufacturer used (it might change by time to time) so it is the body shop solo responsibility to check it if it works with their products and make the necessary preparation. Parts are delivered unfinished and will need to be sanded and prepped before any paint work is done. They require a body shop to handle the installation because they will require fitment and trimming of accessories for installation on some products.

It is important to check the fit of the part on the vehicle before painting!

Important note!

This product does not contain front grille, Audi (four-rings), quattro and RS logos. The logos and the grille shown on the pictures are for illustration purpose only. These items can be purchased separately in any official Audi dealership.

BK-Motorsport is an aftermarket supplier not affiliated with Audi AG or any of its affiliates. BKM aftermarket parts are not manufactured by the OEM nor with its authorization nor under its supervision. The grille, the Four-Rings logo, the quattro and the RS logos are registered marks of the OEM and these items are solely available through them.

]]> BKM Front Bumper Kit (RS-Style – Carbon), fits Audi A7/S7/RS7 C7.0 https://bk-motorsport.eu/tuning/audi/audi-a7/audi-a7-c7/bkm-front-bumper-kit-carbon-fits-audi-a7-s7-c7-0/ Tue, 20 Jun 2017 21:47:35 +0000 https://www.bk-motorsport.eu/?post_type=product&p=22413 BKM front bumper kit carbon. Fits Audi A7/S7/RS7 C7.0.

The bumper has two mounting holes for the PDC sensors. If your car is not equipped with PDC, the PDC Blind Plug Set additional option must be selected!

The bumper contains two ACC blind plugs. If your car is equipped with adaptive cruise control, replace these blind plugs with the car’s original ACC sensors! In some cases it may be necessary to recalibrate the ACC sensors if their position changes during installation.

Your car’s original front grille must be installed in the bumper. If your car is equipped with front view and night vision cameras, these are located in the car’s original front grille.

Bumper parts description:

This is an aftermarket modified (not OEM) product.

This product is delivered unpainted. The price does not include painting and installation costs.

The product is primed. However, we don’t know what primer the manufacturer used (it might change by time to time) so it is the body shop solo responsibility to check it if it works with their products and make the necessary preparation. Parts are delivered unfinished and will need to be sanded and prepped before any paint work is done. They require a body shop to handle the installation because they will require fitment and trimming of accessories for installation on some products.

It is important to check the fit of the part on the vehicle before painting!

Important note!

This product does not contain front grille, Audi (four-rings), quattro and RS logos. The logos and the grille shown on the pictures are for illustration purpose only. These items can be purchased separately in any official Audi dealership.

BK-Motorsport is an aftermarket supplier not affiliated with Audi AG or any of its affiliates. BKM aftermarket parts are not manufactured by the OEM nor with its authorization nor under its supervision. The grille, the Four-Rings logo, the quattro and the RS logos are registered marks of the OEM and these items are solely available through them.

]]>